Price: $79.99
(as of Jul 16, 2025 20:48:47 UTC – Details)
Product Description
Customer Reviews
3.9 out of 5 stars 65
—
—
Price
$79.99$79.99 $57.00$57.00
— no data
LED Colour
White, Blue and Green Options White or Blue Options White or Blue Options
Watts
25Watts 15Watts 36Watts
Lumen
2500 1500 3600
Volt
12V DC 12V DC 10-30V DC
Underwater Boat Light Specification
IP68 Waterproof design (IP68 CLASS III)Underwater boat and yacht lightSalt water resistant product.High-Tech SMD LED with high wattage.110° LED Degree.White and Blue LED colour options. 25W White LEDs 2500 lumens. 25W Blue LEDs 1300 lumens.
Due to the friction force that occurs while the boat is in motion, the recommended application area for the product is the aft of the boat.It is resistant to the shipworm that may occur under the boat. It has a salt water resistant thermal resin body.Impact resistant special glass.Thanks to its special thermal resin cooler body, it increases the performance and life of LEDs.Body assembly is practical. 0.3937in (10 mm) cable hole is drilled on the surface of the hull and the surface of the boat is mounted underwater.Light Head Diameter: 4.980in (126,5mm) , Head height: 0.9449in (24mm) , Full Length: 1.575in (40mm)
High Thermal Conductivity Thermal Resin Body Technology
What is the Thermal Resin?
Thermal resin is not a normal plastic. It is a special plastic containing carbon. The thermal conductivity coefficient in normal plastic type is approximately 0.04 W/mK. (W/mK = The Thermal conductivity measurement unit.) The thermal conductivity coefficient of the carbon-containing thermal resin raw material used in the body of our product is 20W/mK. The thermal conductivity coefficient is 500 times higher than according to normal plastics. Due to the carbon content of the raw material, the thermal resin is smoked gray. Thanks to its high technology and heat conducting resin material, it does not accumulate the heat generated in LED`s. It quickly transfers to the environment it is in. Thus, LEDs work long-lasting. Due to the excessive heat seen in many plastic products, problems such as plastic deformation and burning of LED`s are observed. Thermal resin material is resistant to salt water and corrosion that may occur in water.
LED 48 Pcs 5730 High Power LED LED Degree 110° Volt 12VDC Current 12V 2.10A Watt 25W. LED Colour / Lumen White 2500 lumen , Blue 1300 lumen IP Code IP68 CLASS III Body Material Thermal Resin Body Glass Impact resistant special glass Product Cable 2 mt. 2×1,5 RNF Marine Cable
Boat Light Application Guide
Underwater boat lights should create a pool of light that covers the full width of the transom. On an average boat, two lights will do. But if your boat has a wide beam or multiple outboards, you will need three or more lights.
The first step is to decide where you want to mount your lights. The best mounting location is usually on the transom as low in the water as is possible. Also, separating the lights by at least three feet will give you the best light coverage across your transom.
Next, use a template to check to make sure the lights fit and to mark the location of the power cord hole.
IMPORTANT! Do NOT mark the location of the screw holes at this time. You will use the light itself to mark the screw hole location.
Check inside of the boat to make sure there is room to feed the power cord through. You are also making sure you are not going to drill into anything important such as wiring or hoses. If in doubt, find a different location for your lights.
If everything looks OK you can drill the hole for the power cord.
IP68 Waterproof design (IP68 CLASS III) / Underwater Boat Light. Do not use in waterless environment.
Due to the friction force that occurs while the boat is in motion, the recommended application area for the product is the aft of the boat. Impact resistant special glass.
The thermal conductivity coefficient of the carbon-containing thermal resin raw material used in the body of our product is 20W/mK. The thermal conductivity coefficient is 500 times higher according to normal plastics. Thanks to its high technology and heat conducting resin material, it does not accumulate the heat generated in LED`s.
The Aker Underwater boat Light is resistant to the shipworm that may occur under the boat. It has a salt water resistant thermal resin body.
25W White LEDs 2500 lumens.12VDC. Current 12V : 2.10A , 1 piece LED Underwater Boat Light, 1 pc user manual, 2 pcs 316L Stainless Steel mounting screws
